Full Bearing Range Company logo
Conveyor equipment running in Overhead Conveyors operations

Application · Conveyor & Transmission Bearings

Overhead Conveyors

Overhead and trolley conveyors run on many small bearings in trolley wheels, chain guides and turn wheels, with flanged units on drive and take-up stations. Bearings often run at height, in hard-to-reach positions, and older systems may have flanged units…

Full Bearing Range Company supplies conveyor bearings, pillow block and take-up units, transmission bearings and the full plant bearing range for this application, with seal and load selection matched to your duty.

Send Your Conveyor Specs WhatsApp an Engineer
  • Seal selectionFor dust, moisture and washdown
  • Load-rated sizingStandard or heavier series
  • One supplierConveyor and plant bearings, one order
  • Old-unit matchingFrom photos and mounting sizes

Operating Conditions

Bearing duty in Overhead Conveyors

Conveyor bearings here have to survive contamination, shock load and long running hours. Most of their life depends on the seal arrangement, load rating and housing fit you choose.

Overhead and trolley conveyors run on many small bearings in trolley wheels, chain guides and turn wheels, with flanged units on drive and take-up stations. Bearings often run at height, in hard-to-reach positions, and older systems may have flanged units with no visible model markings. Buyers need reliable sealed bearings and help finding exact replacements for legacy units.

  • Use sealed deep groove ball bearings in trolley and guide wheels so they run long periods without relubrication.
  • To identify unmarked flanged units, send photos with the bolt spacing, center height and shaft diameter.
  • Choose flanged units with a locking method suited to shafts that see frequent start-stop indexing.
  • Where the conveyor passes through ovens or paint lines, check the operating temperature against the seal and grease specification.

Duty conditions we specify for

  • Heavy dust
  • Wet / washdown
  • Heavy load
  • 24/7 continuous duty

Product Categories

Bearing categories used in Overhead Conveyors

These are the bearing and unit categories that Full Bearing Range Company supplies for this application, from conveyor units to drive and plant-wide bearings.

View All Products
Deep Groove Ball Bearing for conveyor and transmission duty
01
Deep Groove Ball Bearing3,655 models
Pillow Block Bearing for conveyor and transmission duty
02
Pillow Block Bearing385 models
Needle Bearing for conveyor and transmission duty
03
Needle Bearing245 models

Products

Bearings and units for Overhead Conveyors

Each unit below suits this application. Ask for a quote on any item and add the other bearings your plant needs to the same order.

bearing unit

Deep Groove Ball Bearing

Good Quality High Precision 604-609 Deep Groove BearingsSpecifications:Inner Diameter20 mmOuter Diameter52 mmThickness15 mmPrecision deep groove ball bearings offering reliable performance…

Get a Quote Details
Maintenance technician inspecting a pillow block bearing on a belt conveyor

Repeat Failures

Same position failing again? We propose the upgrade.

Send the failure history of the position and we will tell you whether it needs a better seal or a heavier series. Nothing changes from your current specification until you approve it.

  • Conveyor position, current unit, shaft size and environment
  • Seal upgrade or heavier unit, with the reasoning
  • Every change requires your written approval
Send Your Failure Record
"We had a repeated failure on a take-up bearing position. Their engineer suggested a heavier unit with a triple-lip seal. We installed it three months ago and it is still running cool. They also supplied all the other bearings we needed for the shutdown."
RJ Robert JohnsonJohnson Grain Terminal, USA
Worn cast-iron flanged bearing unit mounted on an overhead conveyor frame
Photos + mounting sizesare enough to match a replacement
Technician measuring bolt spacing on a bearing housing with a steel caliper Insert ball bearing next to a pillow block housing on a workbench

Old Unit Identification

No model number? We match the replacement.

Older flanged and pillow block units often have no readable marking. Send photos and a few measurements and Full Bearing Range Company identifies a unit that fits your frame directly.

  • Front and side photos
  • Bolt spacing
  • Shaft diameter
  • Mounting style and position
"We sent photos and bolt spacing measurements, and they matched the exact unit within hours." Emma Wilson, Wilson Logistics Warehouse, Australia
Send Photos on WhatsApp

More Applications

Other conveyor applications we supply

Full Bearing Range Company supplies mines, ports, cement plants, aggregate producers, logistics centres and bulk terminals with conveyor bearings and full plant ranges.

Conveyor bearings in Belt Conveyors Belt Conveyors Conveyor bearings in Bucket Elevators Bucket Elevators Conveyor bearings in Roller Conveyors Roller Conveyors Conveyor bearings in Power Transmission & Gearboxes Power Transmission & Gearboxes Conveyor bearings in Conveyor Pulleys & Drive Shafts Conveyor Pulleys & Drive Shafts Conveyor bearings in Belt Take-Up Units Belt Take-Up Units

Overhead Conveyors bearing FAQ

A conveyor bearing position keeps failing. Do I need a better seal or a heavier unit?+

It depends on what is causing the failure. Contamination usually calls for a seal upgrade, while overload calls for a heavier series such as spherical roller units. Send us the position, current unit and environment and we will propose one. No change is made without your approval.

Why did my take-up unit not fit the frame even though the shaft size was right?+

Take-up units vary in frame dimensions, not just bore. Tell us your mounting dimensions along with the shaft size and we will confirm the fit before quoting.

Can you supply our general plant bearings in the same order?+

Yes. Full Bearing Range Company supplies deep groove, angular contact, thrust and precision bearings, linear motion parts, housings, sleeves, lock nuts, seals and lubricants, and they ship together with your conveyor units.

Can you identify an old bearing unit with no model number?+

Yes. Send clear photos with the bolt spacing, shaft diameter and mounting style, and we will match a direct replacement unit.

Request a Quote

Send your conveyor details for Overhead Conveyors

You will receive a written quotation that lists the model, quantity, price, currency, stock, lead time and shipping terms. Include the conveyor position, unit model, shaft size, mounting, environment and quantity. If the model is unknown, attach photos and mounting dimensions.