Full Bearing Range Company logo
Conveyor equipment running in Belt Conveyors operations

Application · Conveyor & Transmission Bearings

Belt Conveyors

Belt conveyors use pillow block and flanged units on pulley and idler shafts, plus spherical roller bearings at the heavy-load positions. Units often run 24/7 under heavy load with abrasive dust, spillage and moisture, so a poorly chosen seal or…

Full Bearing Range Company supplies conveyor bearings, pillow block and take-up units, transmission bearings and the full plant bearing range for this application, with seal and load selection matched to your duty.

Send Your Conveyor Specs WhatsApp an Engineer
  • Seal selectionFor dust, moisture and washdown
  • Load-rated sizingStandard or heavier series
  • One supplierConveyor and plant bearings, one order
  • Old-unit matchingFrom photos and mounting sizes

Operating Conditions

Bearing duty in Belt Conveyors

Conveyor bearings here have to survive contamination, shock load and long running hours. Most of their life depends on the seal arrangement, load rating and housing fit you choose.

Belt conveyors use pillow block and flanged units on pulley and idler shafts, plus spherical roller bearings at the heavy-load positions. Units often run 24/7 under heavy load with abrasive dust, spillage and moisture, so a poorly chosen seal or an undersized series can lead to repeated failures at the same position. Buyers mostly care about seal performance, load rating and how long a unit runs between maintenance stops.

  • On dusty or wet conveyor lines, choose triple-lip or labyrinth-sealed units so fines and slurry stay out of the raceway.
  • When one bearing position keeps failing, check the radial load and shaft speed before choosing between a better seal and a heavier series.
  • Match the housing bolt spacing and shaft height to the existing frame so replacement units bolt straight on.
  • For conveyors in continuous 24/7 service, size bearings for rated life at actual belt tension, not just shaft diameter.

Duty conditions we specify for

  • Heavy dust
  • Wet / washdown
  • Heavy load
  • 24/7 continuous duty

Product Categories

Bearing categories used in Belt Conveyors

These are the bearing and unit categories that Full Bearing Range Company supplies for this application, from conveyor units to drive and plant-wide bearings.

View All Products
Pillow Block Bearing for conveyor and transmission duty
01
Pillow Block Bearing385 models
Spherical Roller Bearing for conveyor and transmission duty
02
Spherical Roller Bearing17 models
Deep Groove Ball Bearing for conveyor and transmission duty
03
Deep Groove Ball Bearing3,655 models
Taper Roller Bearing for conveyor and transmission duty
04
Taper Roller Bearing78 models

Products

Bearings and units for Belt Conveyors

Each unit below suits this application. Ask for a quote on any item and add the other bearings your plant needs to the same order.

bearing unit

Deep Groove Ball Bearing

Good Quality High Precision 604-609 Deep Groove BearingsSpecifications:Inner Diameter20 mmOuter Diameter52 mmThickness15 mmPrecision deep groove ball bearings offering reliable performance…

Get a Quote Details
Maintenance technician inspecting a pillow block bearing on a belt conveyor

Repeat Failures

Same position failing again? We propose the upgrade.

Send the failure history of the position and we will tell you whether it needs a better seal or a heavier series. Nothing changes from your current specification until you approve it.

  • Conveyor position, current unit, shaft size and environment
  • Seal upgrade or heavier unit, with the reasoning
  • Every change requires your written approval
Send Your Failure Record
"We had a repeated failure on a take-up bearing position. Their engineer suggested a heavier unit with a triple-lip seal. We installed it three months ago and it is still running cool. They also supplied all the other bearings we needed for the shutdown."
RJ Robert JohnsonJohnson Grain Terminal, USA
Worn cast-iron flanged bearing unit mounted on an overhead conveyor frame
Photos + mounting sizesare enough to match a replacement
Technician measuring bolt spacing on a bearing housing with a steel caliper Insert ball bearing next to a pillow block housing on a workbench

Old Unit Identification

No model number? We match the replacement.

Older flanged and pillow block units often have no readable marking. Send photos and a few measurements and Full Bearing Range Company identifies a unit that fits your frame directly.

  • Front and side photos
  • Bolt spacing
  • Shaft diameter
  • Mounting style and position
"We sent photos and bolt spacing measurements, and they matched the exact unit within hours." Emma Wilson, Wilson Logistics Warehouse, Australia
Send Photos on WhatsApp

Technical Notes

Selection guides for Belt Conveyors

More Applications

Other conveyor applications we supply

Full Bearing Range Company supplies mines, ports, cement plants, aggregate producers, logistics centres and bulk terminals with conveyor bearings and full plant ranges.

Conveyor bearings in Bucket Elevators Bucket Elevators Conveyor bearings in Roller Conveyors Roller Conveyors Conveyor bearings in Power Transmission & Gearboxes Power Transmission & Gearboxes Conveyor bearings in Conveyor Pulleys & Drive Shafts Conveyor Pulleys & Drive Shafts Conveyor bearings in Belt Take-Up Units Belt Take-Up Units Conveyor bearings in Overhead Conveyors Overhead Conveyors

Belt Conveyors bearing FAQ

A conveyor bearing position keeps failing. Do I need a better seal or a heavier unit?+

It depends on what is causing the failure. Contamination usually calls for a seal upgrade, while overload calls for a heavier series such as spherical roller units. Send us the position, current unit and environment and we will propose one. No change is made without your approval.

Why did my take-up unit not fit the frame even though the shaft size was right?+

Take-up units vary in frame dimensions, not just bore. Tell us your mounting dimensions along with the shaft size and we will confirm the fit before quoting.

Can you supply our general plant bearings in the same order?+

Yes. Full Bearing Range Company supplies deep groove, angular contact, thrust and precision bearings, linear motion parts, housings, sleeves, lock nuts, seals and lubricants, and they ship together with your conveyor units.

Can you identify an old bearing unit with no model number?+

Yes. Send clear photos with the bolt spacing, shaft diameter and mounting style, and we will match a direct replacement unit.

Request a Quote

Send your conveyor details for Belt Conveyors

You will receive a written quotation that lists the model, quantity, price, currency, stock, lead time and shipping terms. Include the conveyor position, unit model, shaft size, mounting, environment and quantity. If the model is unknown, attach photos and mounting dimensions.